Yamaha NS-10M STUDIO Bedienungsanleitung Seite 2

Congratulation on your purchase of a Yamaha NS-IOM STUDIO
Monitor Speaker System! The NS-10M STUDIO has been pain¬
stakingly designed to offer superior near-field monitoring per¬
formance in professional studio applications. This same superb
performance makes the NS-IOM STUDIO an unbeatable choice
for home recording and even audio listening.
■
In order to make the most of the outstanding sound the NS-IOM
STUDIO Monitor Speaker System has to offer, we urge you to
read this Owner's Manual thoroughly.
PRECAUTIONS
FEATURES
• Make sure that the power to your amplifier is turned OFF
before connecting the speakers.
• Do not attempt to drive the speakers at levels above their
rated power capacity. Excessive power can lead to serious
damage.
• Be sure to match the polarity of the speaker terminals
(+, -) with the outputs of your amplifier. If the polarity
of the left and right speakers is reversed, proper stereo
imaging will be impossible to achieve and irregular re¬
sponse will result.
• This speaker system is not provided with grilles over the
woofers. Avoid touching the woofer cone — particularly
the center cap — with fingers or any other object to prevent
possible damage.
• To achieve optimum performance, use audio-quality
heavy-gauge speaker cable.
• Woofer
The 18 cm (7") woofer features a conical, straight cone
formed from a sheet of specially developed paper ma¬
terial, achieving precise pistonic motion for accurate,
distortion-free reproduction. The cone weights a mere
3.7 grams, allowing it to respond ideally even with
extremely low input levels, Power linearity is superb
from the lowest to highest input levels.
• Tweeter
The 3.5 cm (1-3/8") tweeter dome is a laminated
soft-dome type incorporating two specially selected
resins. A unique manufacturing technique ensures
perfectly even resin layers and forms the dome and
tangential edge in one piece. The dome and edge unit
weights only 0.6 grams, achieving superb transient re¬
sponse with minimum distortion.
• Enclosure
Onlythefinest audio-quality high-density particleboard
is used in this sealed bookshelf-type enclosure. A
real-wood exterior with a black finish applied in 7
coatings adds rugged durability and beauty to profes¬
sional-quality sound.
• Crossover Network
Low-distortion inductors and selected MP capacitors
are combined in a carefully designed layout to ensure
smooth crossover with minimum loss and distortion.
• Speaker Terminals
Large screw-type terminals easily accept heavy-gauge
speaker cable for optimum reproduction performance.
1