Ape Labs MINI V1 Anleitung Seite 5

4
Now unplug the battery connector on the board, the
other 2 do not need to be removed.
7
Remove the coarse glue residues from the bottom
plate and clean it.
5
Carefully pry off the battery packs fixed with glue
from the bottom plate with a narrow spatula.
8
Apply heat-resistant mounting glue to the spot for
the new batteries on the bottom plate (if possible).
6
Remove the batteries and dispose of them accor-
ding to local regulations.
9
Now reconnect the batteries to the board. Place
the new batteries in their original position on the
mounting glue.
GB