Ape Labs MOBILIGHT 4 Bedienungsanleitung

CONTROL MODE
menu item with the regarding manufacturers'
transmitters.
Control Mode: You decide how to operate your
OPTIONS:
+/- key > link
device. If you would like to control your device
via remote control, please select remote cont-
VISIBILITY:
rol mode. By selecting this option also on other
Mobilights, devices will automatically commu- DMX MODE
nicate with each other, if same group setting is
chosen for all Mobilights. An example: remote If you operate Mobilights via DMX signal, deci-
control mode is selected for all Mobilights and de here in which mode you would like to work.
they are all assigned to "group 1". You can ch-
OPTIONS:
23 DIM,PROGRAM | 4C DIM,
ange the colour, program or brightness at one
3*COLOR | 12C 4*RGBW | 24C 4*RGBW16
Mobilight or you can use the "Chain Mode" – in
VISIBILITY:
this way Mobilights will synchronize with one
WDMX-Modus
another. In case remote control's signal does
not reach all Mobilights, the last Mobilight in
signal range will transmit it to the Mobilight out DMX ADRESS
of scope. "They talk to each other", as we call it.
Assign a house number to each Mobilight so
OPTIONS:
Standalone | Remote Control |
that the postman knows where to deliver the
DMX/W-APE (Receiver) | W-DMX
data packet.
Note: This option is only available if W-DMX
OPTIONS:
module is connected (wireless solution/ DMX starting adress (1....521-x)
lumen radio).
VISIBILITY:
VISIBILITY:
Always
WDMX-Modus
SOUND TO LIGHT
CHAIN SIZE
Sound to light: An integrated microphone is
Suppose you have 6 Mobilights and you would
mainly set for bass frequencies and tries regu-
like to create a little show without program-
larly to adjust the volume automatically in order
ming effort per light board – then you have
to, at best, obtain constantly sensible volume
come to the right place! Please insert number
levels. Select this option directly on your device
of units here. Further explanation in menu
or via remote control. The ape labs sound-to-
item "pos. in Chain".
light mode is no ordinary sound-to-light mode;
rather, you can activate this feature and hence OPTIONS:
1 - 50
control the pre-programmed programs. This
VISIBILITY:
happens automatically when activating this mode.
Control-Mode and in DMX | W-APE (Recei-
OPTIONS:
Enabled | Disabled
ver) | WDMX-Modus, if „3C"-DMX-Mode is
activated
VISIBILITY: Only in Standalone and Remote
Control mode
POSITION IN CHAIN
W-DMX STATUS
Continuation of "Chain Size": Now assign num-
W-DMX status: In case you have assembled bers to each of your 6 Mobilights. Start with
a „Wireless Solution" or „Lumen Radio" DMX number 1, and finish with 6, from left to right,
card, connect your Mobilights under this
for instance. By calling up programs with
colour gradients, you can observe how effects
and flow will, from now on,"run" over your
various devices. Please make sure that all
Mobilights are in the same group.
Only in WDMX mode
OPTIONS:
1 - 50
VISIBILITY: Only in Standalone | Remote
Control-Mode and in DMX | W-APE (Receiver) |
WDMX-Modus, if „3C"-DMX-Mode is activated
PROGRAM
The first programs are "solid colours", follo-
Only in DMX | W-APE (Receiver) |
wed by colour gradients and effects. Choose
whatever pleases you!
OPTIONS:
1 - 40
VISIBILITY:
Only in Standalone and Remote
Control-Mode
SPEED
Only in DMX | W-APE (Receiver) | Having chosen a program with colour gradient,
you can adapt speed here.
OPTIONS:
-2, -1, 0, +1, +2
VISIBILITY:
Only in Standalone and Remote
Control-Mode
BRIGHTNESS
Decide steplessly on brightness.
OPTIONS: 0 - 100
VISIBILITY: Only in Standalone and Remote
Control-Mode
Only in Standalone | Remote
W-APE TRANSMITTER
This is an ape labs' exclusive! A wireless DMX
transceiver is integrated in every Mobilight. He-
reby, you can, for instance, connect a Mobilight
with your light board via DMX cable, and then ac-
tivate this menu item. The Mobilight now trans-
fers a wireless DMX signal to all other Mobi-
lights, as well as to other ape labs products,
automatically. In other words, you do not need
any separate wireless DMX transmitter. Never-
theless, ape labs also offers separate wireless
DMX transmitter with higher transmitter power.
OPTIONS: Enabled | Disabled
VISIBILITY: Only in DMX | W-DMX mode
BEDIENUNG S A NLEIT UNG IN S T RUC T ION M A NUA L
GROUP
Suppose you have up to 4 different rooms in
close vicinity to each other, and you would like
to operate all rooms differently. In this case,
will assign your devices to different groups. You
can thusly control up to 4 "areas" individually
by remote control. This also applies for the
"Mobilights' talking to each other".
OPTIONS:
1 - 4
VISIBILITY:
Only in Remote Control | W-APE
(Receiver) mode and if „WAPE-Transmitter" is
activated
INFO
The battery status is indicated here. This is the
most important point. Device running time,
serial number as well as several other informa-
tion are displayed here too.
OPTIONS:
Battery status, Device running
time, serial number and more
VISIBILITY: Always
Menu Up
Ape labs
Julius Schrenk
Landwehrstraße 26
D-97249 Eisingen, Germany
Tel. +49(0)9306-985392-0
Fax. +49(0)9306-985392-1
info@apelabs.com
www.apelabs.com
EORI: DE656251339470326
WEEE: Interims ID 45734932
Lens Can be moved up / down
and used upside down
Menu Down
Power Switch On/Off
LCD Display
Value Up Value Up
Value Down Value Down