neno Perla Bedienungsanleitung Seite 13

machine. This will remove milk deposits and prevent bacterial growth.
- Only use drinkable tap water for washing. Use bottled water if the water in your
tap does not meet this requirement.
- When cleaning silicone parts, do not use brushes. Be careful not to pierce them
through.
- Use a mild dishwashing liquid or soap.
- Allow the parts to dry naturally. Store dry appliance parts in a cool, dry place when
you are not using them.
B. DISINFECTION:
1. Membrane, valve, reducers, funnel
- Fill the pot or steriliser with water so that all the components inside (membrane,
valve, regulators, funnel) are covered when placed inside. Bring to the boil. Place
the breast pump parts in the boiling water for 10 minutes. Do not boil.
- Allow the items to dry naturally. Store dry kit items in a cool, dry place when you
are not using them.
1. Milk container, connector, container cap
- Fill a pot or steriliser with water and bring to the boil. Then turn off and transfer
the water to another pot and place the breast pump parts (membrane, valve,
reducers, connector, milk container) in the water for 5minutes. Do not boil.
CAUTION: do not boil the milk container, connector or cap at 100° C. It can cause
damage to the components. Disinfection is carried out as described above.
- Allow the items to dry naturally. Store dry kit items in a cool, dry place when you
are not using them.
C. CLEANING THE PUMPING DEVICE:
- Wipe the pump unit with a soft, wet cloth and a mild dishwashing liquid/soap.
Other cleaners or abrasives may damage the unit and its display.
- When not using the pump unit, store it in a cool, dry place.
06. BREAST PUMP ASSEMBLY
FIG. C
NOTE: Wash your hands thoroughly with soap and water before touching the breast
pump and breast.
1. Connect the valve to the connector in the direction shown.
2. Insert the membrane into the connector.
3. Attach the connector with the membrane to the pumping device.
4. Tighten the milk container in the pumping unit.
5. Attach the funnel to the pumping device.
6. Insert the breast pump into your bra/lactation corset to fit your breasts.
Start expressing your milk.
13