Samsung RB34K6 Serie Bedienungsanleitung Seite 44

Maintenance
3
44 English
Untitled-1 44
RB37 Glass door models
• Open the fridge door, and slightly lift
1
up the left side of the wire cover (1) to
remove. Then, remove the space cover
2
(2) then the dongle PBA connector (3).
NOTE
Keep the space cover in a safe place. It is
necessary when you return the door to the
initial position (before reversing the door).
4. Remove the top frame cover (4) from
the bottom left then the top side. Then,
pull out to the front.
4
• For models that have the display panel
on the top of the fridge, locate the
service holes on the top frame cover (4).
- Insert a flat-head screwdriver into
the left hole and release the left side
first then the upper and lower locks
4
of the right side in this sequence.
Then, slide to the left to remove.
5. Pull out the left side of the hinge cover
(5) to remove, and then slightly lift up
the bottom to pull out.
CAUTION
5
When removing the hinge cover, use
caution not to damage the connectors and
wires on or around the fridge door.
NOTE
Keep the hinge cover in a safe place. It is
necessary when you return the door to the
initial position (before reversing the door).
2016-09-08 5:13:39