Werbung
Verfügbare Sprachen
Verfügbare Sprachen
STEP11: Mount Knob
1. Spot the screw glue (provide your own) on the threaded hole of the knob, then align the knob hole
with the lead screw.
2. Grasp the lead screw to prevent it from rotating, then use the other hand to turn the knob clockwise
until it is no longer rotatable.
3. Release the hand, turn the knob counterclockwise, observe whether the lead screw is rotating
synchronously with the knob, if so, then the installation is finished.
4. If the screw rod does not rotate in sync with the knob, repeat STEP 11 steps 2 and 3.
Knob
Lead Screw
18
Werbung
