Werbung
Verfügbare Sprachen
Verfügbare Sprachen
STEP 11: Install Aluminum Platforms
1. Insert the (4) M5×14 screws through the holes of the polished rod holders and align them with the
corresponding holes of the original aluminum platform and the sheet metal connector, then screw them
in and tighten.
2. Insert the (4) M5×8 screws through the corresponding holes of the sheet metal connector, and screw
them into the threaded holes of the original aluminum platform then tighten.
(4) M5×14 Flat Head Screw
(4) M5×8 Flat Head Screw
Original Aluminum Platform
Attention to the Position
of the Gap Here
Sheet Metal
Connector
39
Werbung
