Werbung
Verfügbare Sprachen
Verfügbare Sprachen
STEP13: Mount Knob
1. Spot some screw glue (you'll need to provide your own) to the threaded hole in the knob. Line up the
hole in the knob with the lead screw.
2. Hold onto the lead screw to keep it from turning. Use your other hand to turn the knob to the right until
it won't turn anymore.
3. Let go of the lead screw and turn the knob back to the left. Watch to see if the screw rod turns along
with the knob. If it does, you're done.
4. If the screw rod doesn't turn with the knob, repeat steps 2 and 3 from STEP 13.
Knob
Lead Screw
46
Werbung
