Jata JCRC2115 Bedienungsanleitung Seite 12

• Don't allow children play with the appliance. Keep the
appliance out of the reach of children.
• WARNING: Do not use this heater in small rooms that are
occupied by people who cannot leave the room themselves,
unless permanent surveillance is provided.
• To unplug, pull from the plug, never from the cable.
• WARNING: To reduce the risk of fire, keep textiles, curtains or
other flammable material at a minimum distance of 1 m from
the air outlet.
• Always place the heater in vertical position.
• Do not rest the cable on hot parts of the appliance.
• This device has a built-in security system that interrupts
operation in case of overheating. If this happens, unplug and
wait about 30 minutes before connecting again.
• The cleaning and maintenance done by users, can not be done
by children without any supervision.
• If the power cord is damaged, it must be replaced by the
manufacturer or by its after-sales service or similar qualified
personnel in order to avoid a danger.
LEGS ASSEMBLING
• The legs (5) must be assembled at the end of the lower part of the appliance.
• Match the holes of the legs with the axes located in the lower part, then screw them.
INSTRUCTIONS OF USE
• Plug in the appliance to the mains.
• Turn the thermostat knob (3) clockwise to the maximum position (MAX.)
• Place the power selector (2) in the desired position. Doing this operation the indicator (4) will light on. Have
in mind that:
Position I: minimum power.
Position II: maximum power.
Position 0: off.
• Once the room reached the desired temperature, turn the thermostat knob (3) anti-clockwise until the pilot
light (4) goes off. Leave the knob in that position and the thermostat automatically maintains at the selected
temperature.
12