Werbung
LS 162e
© BLAUPUNKT
Wall Mounting Brackets Installation Guide
1. Take out the sound bar, paperboard, assembling bolt, bracket screws, plastic wall
mounting bracket and wall mounting screws.
2, Draw out the location of the holes for the screws by paperboard and pencil, to confirm
the location of the plastic w a l l mounting bracket. Please make sure that the paperboard Is
horizontal and the height of the soundbar is suitable for you.
3. Please
drill 4 holes according to the location you drawed on the wall by pencil
4. Punch the assembling bolts Into the holes on the wall.
5. Align the holes from the plastic wall mounting bracket with the holes on paperboard
and wall, then fasten with 4 screws through the assembling bolts.
6. Screw the two wall mounting screws on the rear panel of the sound bar, then you can
hang up your sound bar on the middle holes of both plastic wall mounting brackets easily.
ENGL
Werbung
