Installation; Site; Cleaning And Maintenance - Schaub Lorenz SL TT 158A+++ Bedienungsanleitung

3. Installation

Please check the scope of delivery before installation:
 2 Door trays/1 bottle pocket
 2 Glass-shelves
 1 Crisper
 1 Handle
 2 Hexagonal screws
 1 Allen wrench
 2 Screw hole caps

3.1 Site

1. Unpack the appliance carefully. Dispose of the packaging as described in
chapter
WASTE MANAGEMENT
2. Remove all packaging materials.
3. Remove the foam between the outside condenser and housing.
4. The accessories of your appliance can be protected from damage due to
transportation (adhesive tapes etc.). Remove such tapes very carefully. Remove
remains of such tapes with a damp cloth using lukewarm water and a mild
detergent (see also chapter
components of the back of the appliance!
5. Install the appliance in a suitable position with an adequate distance from
sources of heat and cold.
6. Check that the appliance and the power cord are not damaged.
7. Install the appliance in a dry and well-ventilated place.
8. Protect the appliance from direct sunlight.
9. The doors must open completely and without hindrance.
10. Install the appliance on a level, dry and solid floor. Check the correct installation
with a bubble level.
11. Connect the appliance to the mains properly.
12. The nameplate is inside the appliance or at the back.
Levelling
1. Use the adjustable feet at the front to level the appliance properly.
2. When the appliance is not levelled, the door and the magnetic seals will not
close properly.
.

CLEANING AND MAINTENANCE

). Never remove any
26