Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. n
1.1 g
enerAl notes on sAfety
This operation manual is applicable for the machine LXC
2-TOP.
The machine may only be handled by personnel
who are qualified.
1.2 u
se of the mAchine for PurPoses for
which it is intended
The machine is designed for grinding, matting, structur-
ing, brushing, polishing and smoothing of metal, wood,
plastic and the like.
1.3 i
ncorrect use
All uses other than those described under section
1.2 are regarded as incorrect use and are there-
fore not admissible.
1.4 ec
declArAtion of conformity
Otto Suhner AG, Industriestrasse 10, CH-5242 Lupfig,
hereby declares under sole responsibility that the product
with the serial or batch no. (see reverse side) complies
with the requirements under the Directive 2006/42/EG.
Applied standards: EN ISO 12100, EN ISO 11148. Docu-
ment Agent: M. Voyame. CH-Lupfig, 12/2017
M. Voyame/Division manager
2. c
2.1 P
rior to tAKing the mAchine into serVice
Oiled compressed air is recommended (see also
air quality under section 2.3).
Observe national regulations.
2.2 t
AKing the mAchine into serVice
2.2.1 t
urn on
Tilt lock forward and press lever on plastic sleeve.
12
S
oteS on
afety
ommISSIonIng
2.2.2 t
urn off
Releasing the lever switches the machine OFF.
2.3 r
Ating dAtA
Pressure
Power output
Air consumption full load EN EN ISO 15744
Air consumption at idling EN EN ISO 15744 0.85m
Setting oiler idle
No-load speed
Max. wheel diameter
Spindle thread
Sound pressure level EN ISO 15744 80dB(A), K=3dB(A)
Sound power level EN ISO 15744
Vibration EN ISO 28927-3
Air quality DIN ISO 8573-1
Weight
2.4 o
PerAting conditions
Temperature range during operation: 0 to +40°C
Relative air humidity: 95% at +10°C not condensed
3. h
andlIng
3.1 P
rotection deVices
The machine may only be operated with the ad-
ditional handle fitted! If necessary, the additional
handle can be mounted in reverse.
Loosen the set screw and nut. Remove handle with exten-
sion.
Mount the additional handle reversed.
max. 6.3bar
330W
3
0.7m
/min
3
/min
3-4 drops/min
-1
2'100min
150mm
M14/5/8"-11
91dB(A), K=3dB(A)
2
2
1.83m/s
, K=1.20m/s
3/4/4
0.930kg
/o
peratIon
Werbung
