Lake People PHONE-AMP G108 Bedienungsanleitung Seite 24

THE MAINS FUSE
The 0,25 AT fuse is internally soldered in place on the power supply PCB.
ATTENTION !!
FOLLOW THE SAFETY INSTRUCTIONS:
A blown fuse may refer to internal problems and should only been replaced
during qualified servicing works !!
THE INPUTS
The signal inputs on the rear are equipped
with gold plated XLR female type sockets,
allowing balanced signal injection. They are
marked "BAL IN LEFT" and "BAL IN RIGHT"
respectively.
The gold plated RCA inputs are marked with "UNBAL IN LEFT" and "UNBAL
IN RIGHT".
The "INPUT SELECT" switch on the rear panel serves to switch between
both, the pushed position activates the balanced inputs.
POWER SWITCH
This switch activates the unit. Operation is indicated by the green "ON"- LED
below the switch.
G108 BDA MAN 08-2023 Fried Reim
Operation PHONE-AMP G108
24
XLR input wiring:
PIN 1 GND
PIN 2 (+) PHASE
PIN 3 (-) PHASE