Cardin TXQ449100 Bedienungsanleitung Seite 13

• The use and installation of these appliances must rigorously respect the indications supplied by the
manufacturer. The manufacturer accepts no liability for damage caused by, or situations arising from, the
improper use of these appliances.
Attention! Only for EU customers - WEEE marking.
This symbol indicates that once the products life-span has expired it must be disposed of separately from
other rubbish. The user is therefore obliged to either take the product to a suitable differential collection site for
electronic and electrical goods or to send it back to the manufacturer if the intention is to replace it with a new
equivalent version of the same product.
Suitable differential collection, environmental friendly treatment and disposal contributes to avoiding negative effects on
the ambient and consequently health as well as favouring the recycling of materials. Illicitly disposing of this product by
the owner is punishable by law and will be dealt with according to the laws and standards of the individual member nation.
USE
The S449 radio control allows the remote activation of electrical and electronic appliances with its best
use in the following areas: automatic opening systems, alarm systems and multiple access systems
(apartment blocks etc.)
The receiver has been designed for multiple access with up to 3000 users each of which may be
memorised or cancelled individually. The code is memorised in the receiver via radio.
Each code is stored in a memory location which can activate up to 4 functions. 1 transmitter = 4 func-
tions max. = 1 location; 3000 users = 12000 functions max.
Transmitter versions
TXQ449100 Miniaturized transmitters
TXQ449200 Miniaturized transmitters
TXQ449300 Miniaturized transmitters
TXQ449400 Miniaturized transmitters
TXQ44940M Wall mounted transmitters
Receiver versions
RCQ449GSM Digital receiver with LCD display (3000 codes) + GSM
Attention: the transmitters of the series TRQ449 produced before 2012 do not have the key
block function and are supplied with 2 lithium batteries (2 x CR2032 6V) for more information
download the instructions for the transmitters from www.cardin.it
Memory module
This is extractable, furnished with a non-volatile EEPROM 24LC256 - 3000-code memory type (the
receiver can also be used with the 1000-code 24LC64 module present in the RCQ449D00 receiver)
that contains the transmitter codes.
It is possible to move the memory module to another receiver, maintaining all the functions without
having to reprogram the other receiver.
The programmed codes are maintained in this module even in the absence of power without a time limit.
• Removing and inserting the memory module must be carried out when the receivers are switched
off otherwise the memory content could become corrupt.
Receiver antenna
The installation of the antenna is fundamental, connected to the receiver it represents the reception
point for the radio control. A tuned antenna ANS400 using a coaxial cable RG58 (impedance 50Ω) with
a maximum length of 15 m must be installed between binding posts 12-13. The antenna should be
positioned out of doors in the highest possible point, visible and away from metal structures.
IMPORTANT REMARKS
13
1 button
2 buttons
3 buttons
4 buttons
4 buttons
4 channels