Velleman DVM030 Bedienungsanleitung Seite 18

• Switch off the instrument. Disconnect the test leads.
• Remove the screw at the back of the case and gently open the
housing.
• Remove the defective fuse and insert a new one.
• Close the housing and fasten the screw.
Fuses: F 0.50 A / 1000 V, 6.35 x 32 mm ceramic & F 10A / 1000V, 6.35 x
32 mm ceramic.
Make sure the meter is closed tight and put the protective edge back in
place before using the meter.
V. 01 – 04/05/2023
DVM030
18 ©Velleman Group nv