S-idee 1609 Benutzerhandbuch Seite 22

1
Switch on the transmitter, and then the vehicle.
2
Checking up the throttle operation
Brake/
Backward
Middle
Forward
3
Turning the steering trim to align the front wheels
4
Steering angle rudder amount limit
Steering angle will be
less with turning angle.
Steering angle rudder amount limit: when turning the steering wheel, use "steering angle rudder amount limit"
to adjust the tire rotation angle.
To drive the vehicle
ON/OFF
Forward
Backward
3
Slide the ON/OFF switch to switch on the
transmitter. Press and hold the button on the
ESC/Receiver for 2-3 seconds to switch on
the ESC/Receiver. The transmitter indicator
turns into at this time often bright, hint is
successful to the code.
When you pull the throttle trigger,your vehicle
accelerates forward.When you push the
throttle trigger,your vehicle brakes.When you
release the trigger then push again, your
vehicle goes.
If the front wheels are unaligned and off the
center line the time you do not move the
steering wheel on the transmitter, please turn
the steering trim knob to align front wheels in
line.Turn the steering trim clockwise to align
them if the front wheels point to the left. Turn
the steering trim anti-clockwise to align them
if the front wheels point to the right.
Steering angle will be
increased with turning angle