Chal-Tec 10040962 Bedienungsanleitung Seite 43

Hold the backrest of the child seat
and shake it to check that the child
seat is firmly installed. If the child
seat backrest wobbles or the ISOFIX
connector is loose, repeat the
previously described steps to install
the child seat firmly.
Make sure that the lap belt is behind
the child seat base (as shown in the
illustration).
Pull out the vehicle belts and guide
the diagonal belt through the two
red belt guide hooks 2 along the
back of the child seat.
Insert the vehicle seat belt tongue
into the vehicle buckle and pull the
vehicle belt up to tighten it.
EN
43