Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Way two:
• Drill 4 holes of 6mm diameter at the bottom of the hanging cupboard
• Put the one way valve on the cooker hood, then install the cooker hood on the bottom of the
cupboard, tighten the hood with enclosed 4 screws.
• Install the adjusted board on the bottom of the hood in order to keep out the gap between hood
back and cupboard.
back and cupboard.
Note:
Note:
1. The extensible pipe are optional accessory, not supplied.
1. The extensible pipe are optional accessory, not supplied.
2. Take off protection fi lm before installation.
3. There are 2 methods for ventilation , including ‚ horizontal ventilation' and ‚ vertical ventilation'.
Please pay attention to the ventilation method when installation. See Pic 6
12
Werbung
