Philips beauty Satinelle super sensitive HP6447/00 Bedienungsanleitung Seite 10

ENGLISH
10
1 Make sure the appliance is switched off.
2 Remove the epilating head by pressing the ribbed section and
sliding it off the appliance in the direction of the arrow (fig.14).
3 Remove the pain softener (fig.15).
4 Slide the exfoliating head onto the appliance. It only fits onto the
appliance in one way (fig.16).
5 Switch the appliance on.
6 Choose speed I or II, depending on the required exfoliating
intensity.We recommend exfoliating each leg for 1-3 minutes.
- To obtain a good skin appearance, use the exfoliating head once or
twice a week.
- Don't use any cream, foam, gel or lotion just before or during the
exfoliation.
- Don't use the exfoliating head within two days after epilation.
- For hygienic reasons, the exfoliating head should only be used by
one person.
- We advise you to exfoliate before going to bed at night. Any skin
irritation that may develop will diminish overnight.
- After exfoliation, apply a mild cream or body milk to hydrate the
skin and improve its texture.
Cleaning
Do not use cleaning agents, scouring pads or cloths, petrol, acetone etc.
to clean the appliance. Regular cleaning and maintenance guarantees
the best results and a long life for your appliance.
1 Switch the appliance off and pull the adapter (J) out of the wall
socket.
2 (Type HP6444 only) Remove the precision cap (B) (Fig. 17).
3 Remove the epilating head (D). (Fig. 14) Press the ribbed sections
and slide the epilating head off the appliance in the direction of
the arrow.