Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2
5
4
6
2
4
Illustration 4: Removing conden-
sate tank (top: KT 20; bottom: KT
45)
1
Condensate
2
Securing
tray
screws of
condensate
pump
3
Housing
4
Condensate
pump
5
Fixture of
6
Condensate
condensate
hose
pump (KT
20)
26
3. Disconnect the condensate hose
from the condensate pump.
1
4. Loosen the two securing screws of
2
the condensate pump and pull the
pump from the device (for KT 20:
3
to the side; for KT 45: toward the
front).
The connection remains attached
to the device, as it is sufficiently
long.
1
5. Clean the condensate pump with a
2
damp cloth and a mild detergent.
6. Replace the condensate pump in
3
the device. Secure the condensate
pump and push the condensate
hose into the pump.
10 Troubleshooting
Spare parts and customer service
If you have any queries regarding the
device or wish to order spare parts,
contact your dealer or DANTHERM.
Werbung
