Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. Set the device switch to position
[II].
The condensate pump starts
to pump the condensate
through the drain hose into
the drain or the on-site drain /
collecting vessel.
2. As soon as there is no condensate
left in the tank, quickly set the
switch to position [0], to prevent
the pump from running dry.
Operation with external hygrostat
A hygrostat is connected to the
port on the device.
1. Set the hygrostat to the desired
target humidity.
2. Set the device switch to position
[I].
The device starts in dehu-
midifying mode.
The device switches off automat-
ically as soon as the set target
humidity is reached. The device
remains however in ready mode.
If the target humidity is again ex-
ceeded, the device is automati-
cally restarted.
Switching device off
1. Set the device switch to position
[0].
The indicator in the device switch
is off and the device is shut
down.
NOTICE! For planned prolonged
standstills, pump off the conden-
sate before shutting down the de-
vice.
24
9 Maintenance and care
WARNING! Risk of injury from
inhaling harmful substances
Depending on the location of op-
eration, the components of the de-
vice may become contaminated
with mould or other hazardous or-
ganisms or substances.
When using compressed air to
clean the device and/or the filter,
work in a well-ventilated area,
preferably outdoors.
During cleaning, wear safety gog-
gles and a breathing mask.
ATTENTION! Risk of damage to
property
Detergents can cause damage to
surfaces. Use only mild deterge-
nts.
Use only approved original spare
parts.
Cleaning housing and filter
The cleaning intervals for the device
depend on the actual operating condi-
tions. Check and clean the device
regularly.
If the device is used for drying at
construction sites, it must be checked
and cleaned after each use; the air
filter must be replaced at least once a
week.
1. Switch off the device at the device
switch.
2. Disconnect the power plug.
3. Clean the housing with a damp,
lint-free cloth and a mild detergent.
The original gloss can be restored
with polish.
Werbung
