Werbung
Verfügbare Sprachen
Verfügbare Sprachen
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-
8669).
Fig. 1
ASSEMBLY INSTRUCTIONS
STEP 1:
We recommend having two people to do
the assembly.
Open the carton and remove contents.
Place the Main Frame (No. 1) on level
ground and ensure that you have a work
area that is clean and has adequate space.
STEP 2:
Take out the Magnetic Wrench (No. 7)
from the Main Frame (No. 1) as shown in
Fig. 1.
Loosen a few rotations for the 2 Inner Hex
Bolts (No. 30) using Magnetic Wrench
(No. 7).
Hold the Left & Right Upright Tubes (No.
2L & No. 2R) then lift up in the direction of
the arrow.
Secure both sides of the Left & Right
Upright Tubes (No. 2L & No. 2R) to the
Main Frame (No. 1) by tightening the 2
Inner Hex Bolts (No. 30) that were just
loosened using Magnetic Wrench (No. 7).
NOTE: Please do not completely tighten
the Inner Hex Bolts (No. 30) at this step.
4
Werbung
