Werbung
Verfügbare Sprachen
Verfügbare Sprachen
WARNING:
This treadmill requires a power source of 10 amps (120V) to properly operate. For
your safety, as well as the safety of others, please verify that the power source is correct before
powering the equipment. Any power source above or below this level could cause significant damage
to the equipment and/or user.
This product must be grounded. If it should malfunction or breakdown, grounding provides a path of
least resistance for electric current to reduce the risk of electric shock. This product is equipped with a
cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into
an appropriate outlet that is properly installed and grounded in accordance with all local codes and
ordinances.
DANGER
– Improper connection of the equipment-grounding conductor can result in a risk of
electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the
product is properly grounded. Do not modify the plug provided with the product – if it will not fit the
outlet, have a proper outlet installed by a qualified electrician.
For a grounded, cord-connected product rated less than 15 A and intended for use on a nominal 120-
V supply circuit, the instructions in either (1) or (2):
1. This product is for use on a nominal 120-V circuit and has a grounding plug that looks like the plug
illustrated in sketch A in Figure 1. A temporary adapter that looks like the adapter illustrated in
sketches B and C may be used to connect this plug to a 2-pole receptacle as shown in sketch B if
a properly grounded outlet is not available.
The temporary adapter should be used only until a properly grounded outlet (sketch A) can be
installed by a qualified electrician. The green colored rigid ear, lug, or the like extending from the
adapter must be connected to a permanent ground such as a properly grounded outlet box cover.
Whenever the adapter is used, it must be held in place by a metal screw.
2. This product is for use on a nominal 120-V circuit and has a grounding plug that looks like the plug
illustrated in sketch A in Figure 1. Make sure that the product is connected to an outlet having the
same configuration as the plug. No adapter should be used with this product.
WARNING!
1. NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. Route the power
cord away from any moving parts of the treadmill including the elevation mechanism and
transportation wheels.
2. NEVER operate the treadmill using a generator or UPS power supply.
3. NEVER remove any cover without first disconnecting the power cord.
4. NEVER expose the treadmill to rain or moisture. This treadmill is not designed for outdoor use or
use in any other high humidity environment.
GROUNDING INSTRUCTIONS
10
Werbung
