Treatement Protocoles; Treatment Of Telangiectasias - Fscaresystems Viridex Rf Bedienungsanleitung

MANUEL
RF
5. TREATMENT PROTOCOLS
5.1.

Treatment of Telangiectasias

When the mode "Telangiectasias" is selected, the program will appear on the screen.
This screen indicates:
The apparatus is now ready to be used. To send an impulse, it is enough to press once on the
foot pedal.
We can also begin the care, the indicator "OFF" turns to "ON".
USE
The technique is simple but requires absolute rigour.
It is strongly recommended to follow the seven golden rules:
A beep indicates that the impulse is transmitted.
The beep ceases as soon as the duration of the impulse is finished (ex: an impulse of 0.2 S
will generate 2 sound beeps, an impulse of 0.4 S will generate 4 sound beeps).
During the operation, we have the timer which counts the duration of the care and the impulses
meter which counts the pulse repetition frequency applied.
Date 27/03/2014
THERMOCOAGULATION – Viridex
 The value of the standard power.
 The value of the duration of the
impulse, which is for the spider veins
fixed at 0,2 S.
 On the left we have a clock which
will indicate the operation life of the
Viridex RF when we begin the
care.
 On the left we have the drawing of
a foot pedal with a meter which will
indicate the pulse repetition
frequency when we apply the care.
 An indicator "OFF" in top on the left
indicates that the care is not started.
1. Insert the needle perpendicular to the skin.
2. The zone to be treated must be horizontal.
3. Use a magnifying glass to avoid inserting the
needle outside of the vessel.
4. Clean the needle regularly with a sterile
compress.
5. Pulse every 2-3 mm.
6. Work at a very superficial level.
7. Use the appropriate diameter Ballet needles.
Page 31 de 49 N° de révision : 05