Instructions For Use; Reading The Measurements; About The Display - Lanaform PO-110 Bedienungsanleitung

9. Instructions for use

Insert a finger fully into the oximeter's
measuring sections. Keep the surface
of the nail pointing upwards and release
the clip. Press the power button to switch
on the oximeter.
Warning
If you do not insert your finger fully into
the cavity again, the measuring result
may be inaccurate.
E-IM-PO110-002.indd 9 E-IM-PO110-002.indd 9
4 Warning
Do not allow your finger to vibrate during
the measuring process. Preferably, make
sure your body does not move. Once the
readings have become stable, read the
measured values of oxygen saturation
and pulse on the screen.
Comment: the oximeter will switch off
automatically 10 seconds later after re-
moving your finger.
10. Reading the
measurements
Evaluate the pulsed
oxygen saturation index
Warning
The table below for evaluating your re-
sults does NOT apply to people with certain
pre-existing conditions (for example,
asthma, heart failure, respiratory tract
diseases) and in the event time is spent at
altitudes higher than 1,500 metres. If you
already have an illness, always consult your
doctor for an evaluation of your results.

11. About the display

5
Press the power button continuously
during the monitoring process. The data
monitored and display method will be
displayed cyclically on the OLED screen
in two different ways (text & graph) and
in four directions, as shown in the illus-
tration below.
06-03-23 14:53:01 06-03-23 14:53:01