• Remove the batteries when the oximeter
is not in use for more than two months.
• Do not immerse the oximeter in water or
expose it directly to sunlight.
• Do not expose the oximeter to vibra-
tions or shocks.
• Clean the oximeter probe after each
time it is used.
• Do not use the oximeter for purposes
not specified in this manual. Follow the
instructions in the chapter "Measuring
process" and use the oximeter with care.
• The oximeter is not watertight so do no
immerse it in water or any other liquid.
Clean and disinfect the oximeter as de-
scribed in the "Cleaning and disinfecting
routine" chapter.
• Do not touch the tip of the measur-
ing probe.
• Keep the measuring probe clean to
maintain the accuracy of the readings.
• Do not use the oximeter at an ambient
temperature above 40°C (104°F) or below
E-IM-PO110-002.indd 6
E-IM-PO110-002.indd 6
5°C (41°F). These temperatures are be-
yond the oximeter's operating range.
• Risk of pollution! The recommendation
is that the used oximeter should be de-
posited in a recycling centre.
• 2 x 1.5V AAA batteries (supplied) are
the only replaceable accessories of the
oximeter. Do not use batteries of other
voltages or specifications.
Warning
• Do not use the oximeter in an envi-
ronment containing flammable gases,
flammable anaesthetic or other flam-
mable substances.
• Do not use the oximeter when it is humid
with overflow or water vapour conden-
sation. Do not move the oximeter from
an excessively cold environment to a
high-temperature humid environment.
• Keep the oximeter out of the reach
of children.
• Use of a used oximeter could cause in-
accurate readings.
• The oximeter is designed to diagnose or
treat a health problem or illness. The
results of measurements are provided
for information only.
• Self-diagnostics or self-medication
based on the results obtained are dan-
gerous. Please consult a doctor.
• Do not try to charge dry-cell alkaline
batteries and do not throw them onto
a fire. They could explode.
• Do not dismantle the oximeter and do
not try to repair it. It could be perma-
nently damaged.
• During the measuring process, do not
use a mobile phone or any other de-
vice likely to cause electromagnetic
interference.
06-03-23 14:53:00
06-03-23 14:53:00