Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Introduction
Thank you for choosing the pulse oxime-
ter by LANAFORM.
The Pulse Oximeter is a non-invasive
method used to measure blood oxygen
saturation (SpO2) by checking the percent-
age of oxygen-saturated haemoglobin and
measuring pulse rate. This process has
been in regular use now for twenty years
and is proving to be an essential control in
medical practice for maintaining oxygen
levels and preventing respiratory prob-
lems. The value of the oxygen saturation
may be regarded as dangerous if it is be-
low 90% for arterial blood. Normal value is
100% under normal atmospheric conditions.
Please read all the instructions before
using your product, particularly these
basic safety instructions.
E-IM-PO110-002.indd 2
E-IM-PO110-002.indd 2
E N G L I S H
The photographs and other images
of the product in this manual and on the
packaging are as accurate as possible,
but do not claim to be a perfect repro-
duction of the product.
Contents
01 Unpacking
10 About the display
21 Waste disposal
1. Unpacking
Please open the packaging carefully be-
fore use. Check whether all the accessories
are present and whether any components
have been damaged during transport and
follow the installation and operating in-
structions in this manual. In the event of
any damage or malfunction, please con-
tact the reseller or Lanaform directly. In
the event of any complaint, you will need
06-03-23 14:53:00
06-03-23 14:53:00
Werbung
Inhaltsverzeichnis
