Technical Specifications - EuroLite Mirrorball-Set 20 Bedienungsanleitung

We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
The interior of the device should be cleaned at least annually using a vacuum-cleaner or an air-jet.
There are no serviceable parts inside the device except for the lamp. Maintenance and service operations
are only to be carried out by authorized dealers.
Please refer to the instructions under "Installing/Replacing the lamp".
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

T-36 Pinspot:
Power supply:
Power consumption:
Weight:
Dimensions (LxWxH):
Fitting lamp:
Maximum ambient temperature t
Maximum housing temperature t
Mirrorball motor:
Power supply:
Power consumption:
Maximum charge:
Max. diameter of mirror ball:
Rotation-speed:
Diameter of base plate:
Height:
Weight:
Mirrorball:
Diameter:
Weight:
Colour-wheel with motor:
Power supply:
Power consumption:
Rotation speed:
Colours:
Diameter:
Weight:
Please note: Every information is subject to change without prior notice. 16.02.2004 ©
220-250 V AC, 50 Hz ~
30 W
1 kg
150 x 120 x 115 mm
6 V/30 W PAR-36
: 45° C
a
(steady state): 90° C
B
220-250 V AC, 50 Hz ~
4 W
3 kg
20 cm
approx. 1.5 RPM
113 mm
58 mm
0.3 kg
20 cm
approx. 0.760 kg
220-250 V AC, 50 Hz ~
4 W
ca. 4 RPM
Red, green, yellow, blue
23 cm
0.1 kg
21/39 50101855_V_2_3.DOC