JK-Products Ergoline PRESTIGE 990-S DYNAMIC POWER Montageanweisung Seite 95

Assembly
1
3
09/2012
– Plug in both accent lighting connectors.
15442 / 0
– Fasten light focus consoles.
Tool: No. 2 Philips screwdriver or battery-powered screwdriver with PHZ-bit 2
15582 / 0
Light focus:
– Slide light focus with left side under the middle faceplate.
– Put on right-side cover.
– Fasten three screws.
2
Tool: 4 mm Allen key
15119 / 0
Canopy transport locks:
– Undo the screws and nuts of the canopy transport lock.
– Remove the screws and nuts.
– Open the canopy.
Tool: 4 mm Allen key
07901 / 0
NOTE:
Turn canopy transport lock into parking position in the tray,
see page 45.
Installation Instructions 37/54