Dismantling
1
2
2-3 mm
2
1
3
09/2012
–
Remove the lamp cover.
15578 / 0
–
Open the acrylic glass panel.
–
Remove the lamp covers.
2
07904 / 0
–
Take out the intermediate panel.
07905 / 0
On both sides:
–
Loosen the lower screw.
–
Remove the upper screw.
Tool: No. 2 Philips screwdriver or battery-powered screwdriver with PHZ-bit 2
07907 / 0
–
Unlock hydraulic arm holders and remove lock.
–
Partly pull out hydraulic arm, push in again, and put into front recess.
07906 / 0
Installation Instructions 15/54