Environment Concerns; Declaration Of Conformity - auna Dazzle Pro Bedienungsanleitung

Use a 3.5mm audio cable to connect external media devices (cellphone, cd player, laptop PC, etc.) with the
AUX IN port of the Dazzle. Switch the Dazzle on and select AUX IN with the MODE switch. Disconnect other
devices (USB/SD) before turning to AUX mode.
Turn the Dazzle on and select the SD or USB mode. Insert an appropriate drive into the corresponding
socket. Use the buttons on the device top to navigate through your audio library. Playable audio must be in
the file formats MP3, WMA or WAV.
Use the supplied USB cable to connect the Dazzle to any free USB port of your computer or to a compatible
5V USB mains adaptor (not supplied).The charging time is about 6-7 hours, when the Dazzle is not in use
at the same time. The red charging LED indicates the charging process. It switches off, when the battery is
completely charged.
According to the European waste regulation 2002/96/EG this symbol on the product
or on its packaging indicates that this product may not be treated as household waste.
Instead it should be taken to the appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is disposed of correctly, you will hep
prevent potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product. For more
detailled information about recycling of this product, please contact your local council or
your household waste disposial service.
Manufacturer: CHAL-TEC GmbH, Wallstraße 16, 10179 Berlin, Germany.
This product is conform to the following European directives:
1999/05/EC (R&TTE)
2011/65/EU (RoHS)
8
LINE IN
USB/SD
Charge the Internal Battery

Environment Concerns

Declaration of Conformity