Werbung
• If the power cord is damaged, it must be replaced by the
manufacturer or by its after-sales service or similar qualified
personnel in order to avoid a danger.
ASSEMBLING INSTRUCTIONS
• Joint the two half parts of the base (4) making them coincide.
• Unscrew the base nut (5) of the body.
• Fit the base (3) in both notches and hold with the base nut (5) being sure the cable is in its place.
• Screw the fixing nut of the base clockwise.
INSTRUCTIONS OF USE
• Remember the fan always must be placed on a flat and stable surface.
• Plug the appliance into the mains.
• Select the desired time for the appliance to be on, by turning the timer (4) till maximum 60 minutes, if
you don't want timer function set the knob in the
• Turn the speed selector (2) to:
- Position 0 - Off.
- Position 1 - Minimum speed.
- Position 2 - Medium speed.
- Position 3 - Maximum speed.
• To start the oscillation function, turn the speed / oscillation selector (2):
- Position 1
- Minimum speed.
- Position 2
- Medium speed.
- Position 3
- Maximum speed.
MAINTENANCE AND CLEANING
• Before you proceed to cleaning, make sure the appliance is unplugged from the mains.
• Clean with a slightly damp cloth.
• It is important to keep the frontal grid and the back grid clean of dust.
• Do not use abrasive or chemical products, such as metallic scourers, which may deteriorate the surfaces
of the appliance..
ENVIRONMENT PROTECTION
• Dispose the appliance according to the local garbage regulations.
• Never throw it away to the rubbish. So, you will help to the improvement of the environment.
ATTENTION
• Avant de mettre en marche le ventilateur, veuillez lire
attentivement cette notice et conservez-la pour vous y
reporter au besoin.
• Cet appareil peut être utilisé par les enfants de plus de 8
ans et les personnes handicapées physiques, sensorielles
ou mentales réduites ou sans expérience ni connaissance,
si elles ont reçu l'instruction ou la surveillance pertinentes
concernant l'utilisation de l'appareil d'une façon sûre et
comprennent les dangers qu'il implique.
position. In position "0" the unit will be off.
FRANÇAIS
8
Werbung
