Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.9 Partition for Paper Roll
Set the partition to the width of the paper roll you are loading.
1.
Turn off the power.
2.
Press up on the cover open button to open the paper cover.
3.
Press in the position shown by the arrow and set the partition in a slot that matches
the width of the paper roll you are using.
When using 83-mm wide roll paper, the partition must be removed.
When using 80-mm wide roll paper, the partition must be installed in the 80-mm position.
When using 60-mm wide roll paper, the partition must be installed in the 60-mm position.
When using 58-mm wide roll paper, 2 partitions must be installed in the 58-mm and 60-mm
positions.
4.
Refer to "5.3 Manual Setting of Memory Switches" to change the paper width
settings.
Partition
*1
*1
*2
Notes:
*1: 2-inch (58/60 mm) paper
*2: 3-inch (80/83 mm) paper
— 37 —
Werbung
