Fritz! Powerline 540E Installation Und Betrieb Seite 7

Extending a Wireless LAN Network
Here is how to use FRITZ!Powerline 540E as a WLAN repeater.
1. Start a web browser and enter
FRITZ!Powerline 540E user interface opens.
2. Open System/Operating Mode and click Change Operating Mode.
3. Select WLAN Bridge and click Next. A Wizard starts to guide you through the
confi guration process.
4. Click Finish.
5. If FRITZ!Powerline 540E is connected with your router via a powerline or LAN
connection, clear this connection.
FRITZ!Powerline 540E and your router can be connected
connection.
6. Connect your wireless LAN and network devices with FRITZ!Powerline 540E.
WLAN
12
http://fritz.powerline in the address line. The
with only one
WLAN
Status Display and Operation
You can operate FRITZ!Powerline 540E manually using the three buttons.
kind of
on WLAN function is enabled
fl ashes WPS quick connection in progress
off WLAN function is switched off
press briefl y Starting a WPS quick connection
for factory settings, press and hold at the same time as
on Connected in the powerline network
fl ashes Connecting or not in the powerline network
off Powerline is switched off on the adapter
press briefl y Integrating FRITZ!Powerline safely into an existing
powerline network
13