Werbung
Verfügbare Sprachen
Verfügbare Sprachen
REMOTE CONTROL
UNIT RC-216
Number
buttons (1 through 0)
Play button ( » PLAY)
Automatic search reverse button ( Iq }
Automatic search forward button ( PPI)
Pause button ( Il PAUSE)
Stop button ( HI STOP)
Setting to the Program Mode
e
For program search, press the PROGRAM
button then the number buttons (0 through
9 and +10).
The remote
controi unit is normally set to
the direct mode.
+10
button
Program
button (PROGRAM)
Direct button
(DIRECT)
Call button (CALL)
Manual search reverse button ( 44 )
Manual!
search
forward
button
( PP )
Display (DISPLAY)
Clear Button (CLEAR)
Index button (INDEX)
1-track repeat button
(1)
All tracks
repeat button
(ALL)
Auto edit button (AUTO EDIT)
Auto
space
button
(AUTO
SPACE)
Time
Search
Button
(TIME
SEARCH)
Time mode button (TIME)
| [| __ Volume buttons (VOLUME)
These
control
the output
level of the VARIABLE
output
terminal.
The
volume
increases
when
the
(+)
button
is
pressed, decreases when the {—) button is pressed.
e
Direct Search
Normally, direct search
is possible simply by pressing the desired
number buttons.
e
Program Search (During playback, the track which is currently playing
is programmed
as the 1st track.)
Press
the PROGRAM
button, then
press the number
buttons.
For example,
to program
tracks
number
3, 11, and
5, press
PROGRAM
— 3 —
+10 and 1 — 5.
To cancel the program,
press the DIRECT
button.
TROUBLESHOOTING
lf the CD
player does
not seem
to be functioning
properly, check the
following:
Disc holder does not open or close.
e
ls the power
on?
When a disc is loaded, 00000000
is displayed.
e
Isthe disc loaded properly? ...
See page 6
When the play button ( » PLAY) is pressed, playback does not start.
@ = Isthe disc dirty or scratched? .........ceccsseeseseesenetenens See page 10
There is no sound, or it is distorted.
e
ls the output cord
properly connected
to
We BMIPHTOL? cK ccsntspgetenantriortieriier
cidade csnnteanater See page 6
e
Have the amplifier controls
been
set correctly?
Inputting the Track Numbers
For track numbers below 9, simply press the corresponding button. For
track numbers
of 10 and greater, press the +10 then the number
buttons.
For example, for track number 22 press +10 twice then 2.
Volume
The volume control on the unit will operate when the volume buttons
are pressed. The volume can be checked by looking at the position of
the control.
A specific section
of the disc will not play.
e
Isthe disc dirty or scratched? ...
Programmed
playback
does
not work.
e
Have programming been properly done? ..... See pages 7 and 11
Incorrect operation when buttons on the remote control are pressed.
e
ts the remote control unit being operated
too far from the CD player? oo... cceesceeseserrerreereeee See page 10
e
Are there
obstacles
blocking
the ray?
e
Is the remote control sensor exposed to strong light?
e
Are the batteries exhausted?
See page 10
SPECIFICATIONS
AUDIO
No. of Channels:
2 channels
Frequency
Response:
2 ~
20,000
Hz
Dynamic
Range:
100 dB
Signal-to-noise
Ratio:
115 dB
Harmonic
Distortion:
0.0025%
(1 kHz)
Separation:
103 dB (1 kHz)
Wow & Flutter:
Below
measurable
limit:
(+0.001%
W.peak)
Output Voltage:
2.0 V, VARIABLE
0~2.0 V
DISCS
Compact Disc format
GENERAL
CHARACTERISTICS
Power
Supply:
50/60
Hz, voltage
is shown
on
rating label
Power
Consumption:
22 W
Dimensions:
434 (17.1 in) W x 135 (5.3 in) H x
.
350 (13.8 in)
D mm
Weight:
10.7 kg
FUNCTIONS
AND
DISPLAY
Functions:
Direct selection, automatic
search,
programmed
playback,
repeat
playback,
manual
search,
auto
space,
time
mode,
auto edit, emphasis feature
Display:
Track number, time, music calendar,
and
engaged
modes
Others:
Headphones jack
REMOTE CONTROL
UNIT
RC-216
Remote
Control
System:
Infrared
pulse system
Power Supply:
3 V DC; two SUM-4 (standard size AAA)
dry cell batteries
External Dimensions:
60 (2.4 in) W x 165 (6.5 in) H x 17(0.7 in} Dmm
Weight:
95 g (including batteries)
SUPPLIED
ACCESSORIES
Pin-plug connection cord, mini screwdriver,
* Design
and
specifications
are subject to change
without
notice in the course
of product
improvement.
11
Werbung
