Configuration - Sharp VC-A605G Serviceanleitung

VC-A605S{BK}
VC-A505S(BK)
Configuration
JiGDRIVER-6
—
Gi
45 | Box Driver
Va
NOTE:
This Screwdriver is used for
adjusting the guide roller height
and X-position.
Special Bladed Screwdriver
Tension Band and Plate Adjusting Jig
This is used to screw down resin-
made parts: the specified torque is
Skg.
This Jig is used for height
This Jig is used for height
JiGDRIVER1 10-4
adjustment of the retaining guide.
This Jig is used for height
This Jig is used for height
adjustment of the reverse guide.
Reverse Guide Height Adjusting Jig
JiGRHOOO02 as well.