Cd Changer Basics - Panasonic Cq-Rd545Len Serviceanleitung

CD Changer Basics
<Only for RD545/RD535/RD525/RD525G/RD515>
Note:
CD changer functions are applicable
to units with optional CD changer
unit (sold separately.)
To change mode
While CD changer is connected, press the MODE to change into the CD
changer mode from the current mode and playback starts automatically.
cre
Lath
Selecting a Disc
@ Press "\V -DISC" or "DISC- A" during disc play to select the desired
disc.
Press DISC- A to change the disc in upwards.
Press V -DISC to change the disc in downward.
fl
ai wy!
Then, the selected disc will start to play from the first track.
Note:
The "V -DISC" or "DISC- AA" is operated, has priority over that of Ran-
dom play mode. The Random mode will stop and the disc select function
will operate once the "VV -DISC" or "DISC- A." is pressed.
Selecting a Track
Press "TRACK ®" once to go to the next track. Press repeatedly to
step forward through all the tracks.
Press "<< TRACK" once to play from the beginning of the current track.
Press twice to play the previous track. Press repeatedly to step back-
ward through all the tracks.
Searching a Track
Press and hold "TRACK b®" or "<< TRACK" for more than a half sec-
ond to activate fast forward or reverse through a track. Release "TRACK
bP" or "<td TRACK" to resume the normal CD play from that position.
Repeating a Track
Press 4 (REPEAT) to repeat the current selection. "REPEAT" indicator
lights. The current selection continues to repeat until you press 4 (RE-
PEAT) again.
J "
us
Random Selection
Press 5 (RANDOM). "RANDOM" indicator lights. A random selection of
music is played from all available CDs. To turn it off, press 5 (RANDOM)
again. .
Cit deus
Scanning Tracks
Press 3 (SCAN). The display blinks and the first 10 seconds of each track
on the discs play in sequence.
To stop scanning and continue with the current track, press 3 (SCAN)
again.
Scanning Discs
Press and hold 3(SCAN) for more than 2 seconds. The 1st track of all the
discs in the magazine is played for 10 seconds each. To stop the current
play of the disc scanning, press and hold 3(SCAN) for more than 2 sec-
onds again.