Cassette Tape Play Basics - Panasonic Cq-Rd545Len Serviceanleitung

Cassette Tape Player Basics
Loading a Cassette
Insert the cassette with the exposed tape side facing to the right. Gently
push the cassette in until the mechanism captures it, the cassette loaded
in place and playback starts.
I 2 osennorcaron
Rewind and Fast Forward
Press either «d (REW) to rewind or bt(FF) to fast forward the tape.
oe
a as
tf you rewind the tape fully, it will play on the same program side again.
If you fast forward to the end, play will resume from the beginning of other
side of the tape.
To stop rewind or fast forward, press <m (STOP).
Changing Sides
Press <d to switch to the program on the other side of the tape.
TOP SIDE PLAYING BOTTOM SIDE PLAYING
Ejecting the Tape
Press @ and the cassette will eject for removal, and the previous mode
of operation will be resumed.
Notes:
@ 'f power is switched off before @ is pressed, the cassette will not eject.
Switch on the power again and press & to eject the cassette.
@ The cassette tape should always be removed from the cassette slot
when not in use.
Blank Skip
<Only for RD545/RD535>
Press 5 (B + SKIP) to skip long unrecorded portions on the tape.
This is most convenient if you quickly want to skip the remaining un-
recorded portions at the end of the tape and go fast forward to the begin-
ning of the first music on the reverse side of the tape.
Notes:
e "B - SKIP" indicator lights. However, the blank skip operation will not
work if REPEAT is on. The repeat function has priority over that of the
blank skip function.
@ Also the blank skip operation will not work when the unrecorded por-
tions of the tape is less than 15 seconds.
Repeat Play
<Only for RD545/RD535>
Press 4 (REPEAT) to repeat the same music you are now listening to.
After finishing the music just listened to, the rewind starts automatically
until the beginning of music, and the same music starts playing again. To
turn it off, press 4 (REPEAT) again.