Werbung
Verfügbare Sprachen
Verfügbare Sprachen
USE
This grinder-doser has been designed solely
for grinding coffee beans . Any other use must
be understood as improper, and consequently
hazardous . The manufacturer cannot be held
responsible for any damage as a result of im-
proper or incorrect use . Do not use the grind-
er-doser for grinding other types of food, or
anything else . The grinder-dosers and coffee
grinders manufactured by our company are
intended for skilled personnel for professional
use only, not for household use .
WARNINGS FOR INSTALLATION
AND ELECTRICAL CONNECTIONS
The grinder-doser must be installed by skilled
technical personnel in compliance with the
safety regulations in force . Incorrect installa-
tion may result in injury to people, animals or
things, for which the manufacturer cannot be
held responsible .
• The grinder-doser must be placed on a sta-
ble, flat surface .
• Before plugging in the grinder-doser, make
sure the voltage and frequency values of
the supply mains correspond to the ratings
indicated on the label featuring the grinder-
doser technical data .
• The wall socket must be fitted with an ef-
ficient earth contact . Consequently, it is es-
sential to make sure the earth system is ef-
ficient and in conformity with current safety
regulations . If in any doubt, have the system
thoroughly checked by personnel with the
appropriate professional skills .
• It is compulsory to earth the grinder-doser .
The manufacturer cannot be held responsi-
ble in the event of non-observance of this
regulation .
• It is essential to make sure the ratings of the
system are suitable for the power absorbed
by the grinder-doser (as indicated on the la-
bel featuring the technical data) and that the
wall socket is protected against over currents .
• Do not use extension cables, plug adapters for
multiple sockets or makeshift connections .
• The motor must rotate clockwise . If the rota-
tion of threephase motors is to be inverted,
by inverting the two power supply wires
inside the plug, this must be carried out by
skilled personnel .
OPERATING THE GRINDER-DOSER
Preliminaries
Make sure the hopper is positioned correctly
on the coffee grinder-doser and is fastened
to the upper grinding blade holder by means
of the relevant screw . Close the locking slide
and fill the hopper with coffee beans . Open the
locking slide so that the beans are allowed to
drop into the grinding system .
Switching on and off
On: set the switch to 1 .
Off: set the switch to 0 .
Models with time switch
The grinder-doser starts to operate when the
timer knob is turned clockwise, and it switches
off automatically . To switch it off manually, just
turn the knob clockwise as far as it will go .
Automatic models
When the switch is turned to 1, the grinder-
doser receives electrical current . When the
knob is then turned to the START position,
the appliance begins grinding . After 6 coffee
doses, grinding starts again automatically and
stops when the doser is full . When the switch
is turned to 0, the grinder-doser is switched off .
17
Hopper safety screw
Werbung
