Werbung
Verfügbare Sprachen
Verfügbare Sprachen
If the test picture is free of disturbance, the TV adjust-
ment is complete. Set the TEST SIGNAL switch to OFF.
If the test picture is not free of disturbance
1
2
Reset the TEST SIGNAL switch to OFF.
Adjust the channel of the TV to a channel between
UHF channels 30 and 39 with the tuning control or
the fine tuning contro! on the TV, so that the TV
screen
shows
no
picture
and
so
that
a steady
rustling sound or no sound is heard.
Set the TEST SIGNAL switch to ON again.
Slowly turn the RF CHANNEL
screw on the back of
the recorder with the supplied screwdriver, until you
see an undistorted test pattern on the TV screen.
Now the TV adjustment is complete. Reset the TEST
SIGNAL switch to OFF.
©-@
© ©0008 .
RF CHANNEL
Screwdriver
(supplied)
cel Wie Me
anat ls
a
a a a l
ga
e
TT e e
S
ee a a
ee a ey L
ee
Werbung
