Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. Connect the supplied charging base to the power supply. The
indicator in the middle is green if it works properly.
4. Place the battery in the charging slot (see C – ② ).
Note:
The left and right indicators show the charging status of the
batteries.
Solid red: charging normally.
Solid green: fully charged.
5. When the battery is fully charged, draw the battery from the charging
base, and disconnect charging base from the power supply.
6. Insert the battery into the battery compartment, and push it into the
locked position.
3. Mount Hand Strap (Page 4 – D)
Steps:
1. Insert the upper part of the hand straps into the buckles
(see D – ① ).
2. Fit the buckle on the device and tighten the screw with the supplied
wrench.
3. Thread the lower part of the hand strap through the holes at the base
of the device.
4. Secure the hand strap with the hook-and-loop fastener, and adjust the
tightness accordingly (see D – ② ).
4. More Operations
Scan the QR code to obtain the user manual for more detailed
operations.
1. Aufbau
Das Aussehen der verschiedenen Modelle kann variieren. Bitte nehmen
Sie das tatsächliche Produkt als Referenz.
7
Deutsch
Werbung
