HIKMICRO AI Serie Schnellstartanleitung Seite 8

No. Component
14 Visual Lens
Tripod Attachment
15
Point
Hand Strap
16
Attachment Point
17 Trigger
Hand Strap
18
Attachment Holes
Micro HDMI
19
Interface
20 Type-C Interface
21 MicroSD Card Slot
2. Charge the Device
2.1 Charge Device via Type-C Interface (Page 3 – B)
Steps
1. Lift the interface cover on the top of the device.
2. Connect the type-C interface to the power adaptor using a USB type A
to type C cable.
3. Connect to the power supply to charge the device.
Note: Please charge the battery for more than 4 hours before the first
use.
2.2 Charge Device via Charging Base (Page 3 – C)
Before You Start
Make sure the device is powered off before removing the battery.
Steps:
1. Hold the device, and press both battery lock catches of the device
(see C – ① ).
2. Hold the lock catches, and draw the battery base to remove the
battery.
Function
Generates the visual images.
Mounts the tripod.
Fixes the upper part of the hand strap to
the device using screws.
Non-Menu Mode:
● Press: Capture snapshots.
● Hold: Record videos.
Menu Mode: Press to return to live view
interface.
Fixes the lower part of the hand strap to
the device.
Displays the image and menu interface
via HDMI output.
Charges the device or exports files with a
USB type A to type C cable.
For holding the MicroSD card.
6