Aiwa NSX-V100 Bedienungsanleitung Seite 4

CONNECTIONS 3 Connect the supplied MW/LW loop antenna.
Connect the MW/LW antenna to the MW/LW LOOP terminals.
Before connecting the AC cord
The rated voltage of your unit shown on the rear panel is
230 V AC. Check that the rated voltage matches your local
voltage.
IMPORTANT
¢ Connect the speakers, antennas, and all optional equipment
first. Then connect the AC cord in the end.
1 Connect the right speaker to the main unit.
Connect the right speaker cord to the SPEAKERS R terminals.
The speaker cord with the white stripe should be connected
to the @ terminal and the black cord to the @ terminal.
4 Extend the FM wire antenna and fix its end toa
wall, etc.
5 Connect the AC cord to an AC outlet.
2 Connect the left speaker to the main unit.
Connect the left speaker cord to the SPEAKERS L terminals
in the same manner as step 1.
FM wire antenna
MW/LW antenna
Left speaker
Right speaker
Speaker cord
3 ENGLISH