Autotek TransAm TA 1400 Bedienungsanleitung Seite 8

Please read the user's manual carefully before the installation and the first operation
of the amplifier.
SPECIFICATIONS
Output Power RMS
Output Power Max.
Loudspeaker impedance (stereo)
Frequency Response
Total Harmonic Distortion
Signal-to-Noise Ratio
Input Sensitivity
Input Impedance
Low Pass Filter
Subsonic / High Pass Filter
Bass EQ
Line Outputs
Operating Voltage
Fuse Rating
Dimensions (B x H x L)
All Specifications are subject to change
8
TA1400
1 x 225 W @ 4 Ohms
1 x 400 W @ 2 Ohms
1 x 450 W @ 4 Ohms
1 x 800 W @ 2 Ohms
2 – 8 Ohms
5 – 40 000 Hz (-3 dB)
< 0,01 % (1 kHz)
> 90 dB
0,1 – 5 V
47 kOhm
30 – 250 Hz @ 12 dB/Octave
20 – 50 Hz @ 12 dB/Octave
0 – 12 dB @ 45 Hz
Stereo, fullrange
+12 V (9 – 15 V), negative ground
2 x 25 A
223 x 63 x 250/276 mm