Netro SPRITE Schnellstartanleitung Seite 6

Wiring
Reconnect
Tips:
Use the picture of the wires on your old controller
The slot named "M" is for the master valve or the pump
2
it is named as "PMV" or "P/MV"
you can leave this "M" slot unconnected
If the old controller
3
one of the "C' slots and the other "C' slot WI sit empty
If you want to use your old power adapter which has a ground wire, you can
4
eave the ground wire open
If the old controller
5
the sensor wires because your Sprite obtains weather information from the
WiFi network
COMMON
If you are not sure about the wiring, please send the picture of the
wiring
customer
the wires
has only one common wire, you can connect
is connected
c 123456 7
TO ZONES
WIRE MASTER
in the old controller
service will provide quick support
to the slots
f you do not have a master valve or a pump,
to a rain sensor, you do not need to connect
8 9 1011 12M C24VAC
VALVE COMMON
to
on the base
to he p you remember
In some control ers
POWER ADAPTER
WIRE
it to either
Our
-4-