Power Interruption - Starlyf Bread Make Bedienungsanleitung

PARTS AND FEATURES (A)
Part Description Part Description
1 Top Lid 6 Housing
2 Knead Paddle 7 Hook
3 Bake Chamber 8 Measuring Cup
4 LCD Display 9 Measuring Spoon
5 Control Panel 10 Handle
FUNCTION INTRODUCTION
CONTROL PANEL (B)
AFTER POWER ON
Plug the bread maker into
power supply, a beep will
be heard and "3:00" will be
displayed. But
between the "3" and "00" don't
flash constantly.
And "1" is the default program. The arrows point
to "1.2lb" and "MEDIUM" as they are default
settings.
START/STOP BUTTON
Press the START/STOP button once to start
a program.The indicator will light up, and the
colon in the time display begin to flash and the
program will start. Any other button is inactivated
except the START/STOP button after a program
has begun.
Press the START/STOP button for 0.5 seconds
and shift to pause state,if no operation in 3
minutes,the program will continue processing
unitl the setting program completed.
Press the START/STOP button for 3 seconds to
cancel a program, then a beep will be heard, it
means that the program has been switched off.
This feature will help to prevent any unintentional
disruption to the operation of program.
To remove bread,press the START/STOP button
to end the baking cycle.
PREPROGRAMMED MENU
Press MENU button to select your desired
programs. Each time it is pressed (accompanied
by a short beep) the program will vary. Press
the button discontinuously, the corresponding
program number will be cycled to show on the
LCD display.
CRUST COLOR
Press COLOR button to selet your desired
setting:
Light,Medium,or Dark crust
This button is adjustable in programs menu
1-3,5,8-10.
WEIGHT
Press the Weight button to choose your desired
gross weight (1.2lb,1.5lb).
This button is adjustable in programs programs
menu1-3,5,8-10.
the colon
DELAY TIMER("▲ or ▼ ")
Use the DELAY TIMER feature to start the bread
maker at a later time.Press "▲ or ▼" buttons
to increase the cycle time shown on the LCD
display.Add up to 15 hours including the delay
time and breadmaking program.
NOTES:
• Set the Delay Time after selecting PROGRAM
MENU,WEIGHT,and CRUST COLOR.
• Do not use the timer function with recipes
that include dairy or other ingredients,such as
eggs,milk,cream,or cheese.
• You must decide how long it will be before
your bread is ready by pressing the "▲ or ▼"
. Please note the delay time should include the
baking time of program. After baking program
is complete,the bread machine will shift to
the Keep Warm setting for 1 hour.Before start
making bread,press the program menu and
crust color are select first, then pressing "▲ or
▼" o increase or decrease the delay time at the
increment of 10 minutes. The maximum delay
is 15 hours.

POWER INTERRUPTION

In the event of a power outage,the process of
making bread will continue automatically within
10 minutes,even witout press START/STOP
button.If the interruption time is longer than 15
minutes,the unit will not continue running and
the LCD display will revert back to the default
setting.If the dough has started rising,discard
the ingredients in the bread pan and start over.
If the dough has not entered the rising phase
when the power cord is remove from wall outlet.
. you can press the START/STOP button to
continue the program from the beginning.
WARNING DISPLAY
"HHH"-This warning means that the temperature
inside of the bread pan is too high.Press START/
STOP button(see below figure1)to stop the
program,unplug the power cord,open the top
lid,and let the machine cool down completely for
10-20minutes before restarting.
"EE0"-This warning means that the temperature
sensor is disconnected.Press
STOP button(see below figure2) to stop the
program,unplug the power cord. Please check
the sensor by the nearest authorized service
agent for examination, repair or electrical /
mechanical adjustment.
Figure 1
KEEP WARM
After baking program is complete,the bread
machine will beep 10 times and shift to Keep
Warm setting for 1 hour.It will be displayed
"0:00".
After 60minutes
display.
To cancel the Keep Warm process,press the
START/STOP button
for 3 seconds.
TIP:Removing bread immediately after baking
program is complete will prevent crust from
becoming darker.
START/
Figure 2
will shown on the LCD
5