roco Diesellokomotive V 90 Bedienungsanleitung Seite 9

Maintenance
To enjoyyour locomotivefor a long time, it ist
necessar y to service it regularly(i.e.after it has
beenin operation for approximately30 hours).
l. Cleaning of wheel contacts: Wheel contacts
easily get dirty on tracks which are not entirely
clean. Use a small brush to remove
spots marked in fig. 4. Prior to cleaning remove
gearcover(fig.3).
2. Lubrication: Apply tiny oil drops to spots
marked in fig. 7. Prior to lubrication dismantle
locomotive (fig. 2). We recommendusing item no.
10906, Roco oiler. Forlubrication the gear-parts
(e.g. cog-wheels, worm) we would recommend
our Roco special grease (item No. 10905).
Attention: Please do not oil these parts when
using our grease.
of the model
dirt from
3. Change of traction tyre: Removegear cover
(fig. 3). Takeout wheel set and removetraction
tyre using a pin or a fine screwdriver (fig. 4).
When pressing on the new traction tyre please
avoid twisting it.
4. Carbon Brush Changing: First remove loco
body (fig. 2), and then the motor (fig. 5).
o Assembly
Off you go!
*) Fleischmannis a registered brand of Messrs.
Fleischmann,Nuremberg.
9