Herunterladen Diese Seite drucken

PrimAster PMAHS 40 Originalbetriebsanleitung Seite 19

Vorschau ausblenden Andere Handbücher für PMAHS 40:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

f) Do not expose a battery pack or tool to fire or ex-
cessive temperature. Exposure to fire or temperature
above 130°C may cause explosion.
g) Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging impro-
perly or at temperatures outside the specified range
may damage the battery and increase the risk of fire.
6) Service
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
b) Never service damaged battery packs. Service of
battery packs should only be performed by the manuf-
acturer or authorized service providers.
Safety Instructions Hedge trimmer
Keep all parts of the body in safe distance from the kni-
fe. Do not try to remove the material being cut or hold
material to be cut when the knife is running. Jammed
cuttings to be removed only when the machine is off
and the battery taken out. A moment of inattention
when using the hedge trimmer may result in serious
injuries.
Carry the hedge trimmer by the handle when the
knife is off. Fit the protective cover whenever the
hedge trimmer is to be transported or stored. Careful
treatment with the appliance reduces the risk of injury by
the blade.
Hold the power tools by the insulated handles as
the cutting knife may come into contact with hidden
cables/lines. Contact of the cutting knife with a live con-
ductor may bring the metal parts of the appliance under
voltage and cause electric shock.
FURTHER SAFETY INSTRUCTIONS
Before work, check the area for any hidden items such as
wire fences.
When working, keep the appliance firmly with both
hands and with a distance from your body.
WARNING
Wear personal protective equipment.
• Always wear goggles when using the machine.
• Wear ear protectors!
• Wear solid shoes and long trousers.
Provide adequate lighting or good lighting conditions
when working with the machine. Poor lighting/light
conditions represent a high safety risk.
Do not use the appliance in bad weather, especially when
there is a risk of storm.
Walk! Never run!
Be careful when going backwards – risk of tripping!
Provide a safe posture, especially on slopes.
Despite the observance of the operating instructions there
still may be some hidden residual risks.
CAUTION
Damage to health arising from vibrations to hand
and arms if the device is used for a long time or if the
device is not guided and evaluated properly.
Vibration damping systems are no guaranteed protection
against white finger disease or carpal tunnel syndrome.
Therefore, it is necessary to carefully check the state of
your fingers and wrist if you have regularly used the appli-
ance for a long time. If any symptom of the diseases above
appears, seek medical advice immediately. To reduce the
white finger disease risk, keep your hands warm and take
regular breaks during your work.
CAUTION
Hearing damage
A longer stay in the immediate vicinity of the running
unit may cause hearing damage. Wear ear protectors!
When working with the device, a certain level of noise
cannot be avoided. Noisy work should be scheduled for
hours, during which it is allowed by statute or other local
regulations. Adhere to any applicable rest times and limit
your working time to the necessary minimum time. For
your personal protection and the protection of people
nearby, suitable hearing protection must be worn.
Please do also consider any local regulations concerning
noise protection!
DANGER!
Warning This power tool generates an electromagnetic
field during operation. Under certain circumstances, this
field may affect active or passive medical implants. To
reduce the risk of serious or fatal injury, we recommend
that individuals with medical implants consult your physi-
cian and the manufacturer of the medical implant before
operating the machine.
The appliance must not be used if damaged or safety
equipment is defective. Replace any worn-out and dama-
ged parts.
Check all screw and plug-in connections and protective
equipment if firm and tightened properly and whether all
moving parts are running smooth whenever the appliance
is to be put into operation.
The protective equipment on the appliance is strictly
prohibited to be disassembled, changed, used in conflict
with the designation and it is prohibited to attach any
protective equipment of other manufacturers.
The ON/OFF switch and safety switch must not be locked.
Stop the device and disconnect it from the power supply
• whenever you leave the lawnmower
• before removing blockages
• efore checking, cleaning or working on the device
GB
ENGLISH
17

Werbung

loading