Werbung
Verfügbare Sprachen
Verfügbare Sprachen
TECHNICAL DATA
Hedge trimmer
Battery voltage
Cutting length
Weight without battery/charger
Noise details
Measured according to
EN 62841-1;
1)
Sound pressure level L
1)
pA
Sound power level L
2)
WA
Vibration details
Total vibration values (triaxial vector sum) Determined properly EN 62841-1, Uncertainty K = 1,5 m/s
Vibration emission value a
Recommended battery types
Recommended chargers
Technical changes reserved.
WARNING: The declared vibration emission level represents the main applications of the tool. However if the tool is
used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total working period.
The vibration emission level will vary because of the ways in which a power tool can be used and may increase above
the level given in this information sheet.
The vibration emission level may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
An accurate estimate of the vibratory load should also take into account the times when the tool is shut down or when
it is running but not actually in use. This may significantly reduce the vibratory load over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as maintain the tool and
the accessories, keep the hands warm, organisation of work patterns.
SAFETY INSTRUCTIONS
Read and understand the operating instructions
before using the appliance. Familiarise with the control
elements and how to use the appliance properly. Abide
by all the safety measures stated in the service manual.
Act responsibly toward third parties.
The operator is responsible for accidents or risks to third
parties.
In case of any doubts about connection and operation
refer please to our customer center
General Power Tool Safety Warnings
WARNING
Read all safety warnings, instructions, illustrations
and specifica tions provided with this power
tool. Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term „power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-
2000/14/ EG; Uncertainty K = 3 dB (A)
2)
h
operated (cordless) power tool
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause you
to lose control..
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
GB
ENGLISH
PMAHS 40
40 V DC MAX
530 mm
2,75 kg
76,5 dB (A)
94 dB (A)
2
<2,0 m/s
2
Typ LI 25 / LBA40120 / LBA40240
/ LBA40120-1 / LBA40240-1
CGA402 / CGA405
15
Werbung
