DECOLLETÉ
Select PROGRAM M or 1 for the flabbiest parts and PROGRAM 1 or 2 for the less
flabby parts. To make the cup slide more easily over the area, apply oil-based
cosmetics (such as baby oils).
ALWAYS begin with the power level at the minimum; you can increase the power
when you have seen how best to use the appliance.
·
Do the massages shown in the figures
concentrating them in an upward
direction.
AND NOW, WE WISH YOU A LOT OF SUCCESS WITH YOUR VACUUM MASSAGER
ON THE WAY TO A GOOD FIGURE AND A HEALTHY SKIN!
Disposal Instructions
Waste electrical devices marked with this sign must not be dis-
posed of with your household waste, but are to be collected
separately. Therefore, please return this device at the end of its
life cycle to special collection points for disposal or your local
dealer.
Your massager is packed in a retail box. Such boxes are recyclable
waste, i.e. they are reusable or recyclable.
52
USE
Components
Vacuum nassager
Replaceable suction cups
Power supply
Operating manual
Technical specifications
Power supply supplier
Power supply MODEL
Power supply voltage:
Battery charting time
Maximum suction strength
Weight
Working cycle
Operating temperature
Storage and transport conditions
Battery
TECHNICAL DATA
1 piece
3 pieces
Diameter:15, 30 and 55 mm
Suction cup for face x 2
1 piece
1 piece
Avatar Product Design Co.
HYT-0421500E
Input: 110-240V~,50/60Hz, 0,3A Max
Output: 4,2V
1.5A
5-6 hours
Min. 13,3 – Max. 53,30 kPa
(2 - max. 8 psi)
Device 230 g
Power supply 90 g
Suction cups 140 g
45 min. on / 30 min. off
10° C bis 40° C
Temperature range 10 - 50° C
Humidity range 30-70 %
IFR14500
53